Aberdeen Proving Ground CNC Machining Services

CNC machining services for Aberdeen Proving Ground manufacturers. ITAR-registered precision machine shop in Hanover, PA.

Precision CNC machining services for manufacturers and OEMs in Aberdeen Proving Ground. Olympus Machining LLC is an ITAR-registered CNC machine shop in Hanover, Pennsylvania offering CNC milling, CNC turning, and prototype-to-production machining.

About Aberdeen Proving Ground CNC Machining Services

Aberdeen Proving Ground CNC Machining Services at Olympus Machining LLC is delivered from our ITAR-registered precision CNC machine shop in Hanover, Pennsylvania (York County). This page (https://www.olympusmachining.com/areas-served/aberdeen-proving-ground-cnc-machining) documents the scope, controls, and engineering practices we apply for OEM, aerospace, defense, and medical buyers requesting aberdeen proving ground cnc machining services.

Olympus Machining is CAGE 9V9P0, CMMC Level 1 self-attested per FAR 52.204-21, and NAICS 332710. CMM dimensional inspection is performed in-house on Haas HMM 430 and Chien Wei CWB-450-CNC. AS9102 Rev C First Article Inspection packages, material certifications with heat/lot traceability, and Certificates of Conformance are produced on request as part of aberdeen proving ground cnc machining services.

To request a quote, supplier qualification documentation, or a controlled copy of our capability statement related to aberdeen proving ground cnc machining services, contact info@olympusmachining.com or call (717) 634-5094. Olympus Machining LLC, 639 Frederick Street Suite 1, Hanover, PA 17331.

Related pages

    Approximately 75 miles / 1 hr 30 min from Hanover, PA via I-83 South and I-695

    Aberdeen Proving Ground CNC Machining Services | Olympus Machining, Hanover PA

    Olympus Machining LLC is an ITAR-registered, CAGE 9V9P0 precision CNC machine shop in Hanover, Pennsylvania, supplying precision machined components to defense contractors and program offices supporting Aberdeen Proving Ground (APG) — the U.S. Army's primary research, development, and testing installation on the Chesapeake Bay. Our York County, PA facility is approximately 75 miles from APG, supporting same-week prototype turnaround and reliable production deliveries to the Aberdeen defense corridor.

    Qualified Supplier for APG Defense Programs

    ITAR Registered

    Registered with the U.S. Department of State DDTC. Authorized to manufacture defense articles for controlled programs.

    CAGE Code 9V9P0

    Active Commercial and Government Entity code registered to our Hanover, PA facility for federal procurement and supplier qualification.

    CMMC Level 1

    Practices aligned with the 17 FAR 52.204-21 safeguards. Annual SPRS self-assessment. Details.

    Part Categories Procured by APG and Its Contractors

    Representative categories of precision machined components Olympus Machining produces for the Aberdeen Proving Ground supply chain. Specific part classes vary by program; submit a drawing for an accurate quote.

    Weapon System Brackets and Mounts

    Aluminum and steel structural brackets, sensor mounts, and rail-system hardware for ground vehicle and small-arms test programs.

    Test Fixturing and Ground Support Equipment Housings

    Custom enclosures, instrumentation housings, and modular test fixtures supporting RDT&E activities at APG ranges.

    Antenna and Sensor Mounting Hardware

    Precision-milled mounts and adapter plates for antennas, EO/IR sensors, and electronics packages used in test articles.

    Electronics Enclosures and Cold Plates

    Machined-from-plate enclosures and cooling plates for ruggedized electronics, including features for EMI gasketing and connector cutouts.

    Replacement and Spares for Legacy Systems

    Reverse-engineered or drawing-based reproduction of legacy components to keep test articles and support equipment operational.

    CNC Machining Services

    Full-service precision CNC machining shipped from our Hanover, PA facility to Aberdeen, Maryland and the surrounding defense corridor.

    Add Olympus Machining to Your APG Supplier List

    Supplier qualification packages — ITAR registration confirmation, CAGE 9V9P0, CMMC Level 1 self-assessment, and quality flowdown acknowledgement — are available on request. Contact us to begin the qualification process for your Aberdeen Proving Ground program.