Carderock Nswc CNC Machining Services

CNC machining services for Carderock Nswc manufacturers. ITAR-registered precision machine shop in Hanover, PA.

Precision CNC machining services for manufacturers and OEMs in Carderock Nswc. Olympus Machining LLC is an ITAR-registered CNC machine shop in Hanover, Pennsylvania offering CNC milling, CNC turning, and prototype-to-production machining.

About Carderock Nswc CNC Machining Services

Carderock Nswc CNC Machining Services at Olympus Machining LLC is delivered from our ITAR-registered precision CNC machine shop in Hanover, Pennsylvania (York County). This page (https://www.olympusmachining.com/areas-served/carderock-nswc-cnc-machining) documents the scope, controls, and engineering practices we apply for OEM, aerospace, defense, and medical buyers requesting carderock nswc cnc machining services.

Olympus Machining is CAGE 9V9P0, CMMC Level 1 self-attested per FAR 52.204-21, and NAICS 332710. CMM dimensional inspection is performed in-house on Haas HMM 430 and Chien Wei CWB-450-CNC. AS9102 Rev C First Article Inspection packages, material certifications with heat/lot traceability, and Certificates of Conformance are produced on request as part of carderock nswc cnc machining services.

To request a quote, supplier qualification documentation, or a controlled copy of our capability statement related to carderock nswc cnc machining services, contact info@olympusmachining.com or call (717) 634-5094. Olympus Machining LLC, 639 Frederick Street Suite 1, Hanover, PA 17331.

Related pages

    Approximately 100 miles / 2 hr from Hanover, PA via I-83 South and the Capital Beltway

    NSWC Carderock CNC Machining Services | Olympus Machining, Hanover PA

    Olympus Machining LLC is an ITAR-registered, CAGE 9V9P0 precision CNC machine shop in Hanover, Pennsylvania supplying precision machined components to prime contractors and program offices supporting Naval Surface Warfare Center Carderock Division — the Navy's lead lab for naval architecture, marine engineering, hydrodynamics, and platform integrity. Our York County, PA facility provides ITAR-controlled prototype and production parts to the Carderock surface- and undersea-platform supply chain.

    Qualified Supplier for NSWC CD Defense Programs

    ITAR Registered

    Registered with the U.S. Department of State DDTC. Authorized to manufacture defense articles for controlled programs.

    CAGE Code 9V9P0

    Active Commercial and Government Entity code registered to our Hanover, PA facility for federal procurement and supplier qualification.

    CMMC Level 1

    Practices aligned with the 17 FAR 52.204-21 safeguards. Annual SPRS self-assessment. Details.

    Part Categories Procured by NSWC CD and Its Contractors

    Representative categories of precision machined components Olympus Machining produces for the NSWC Carderock supply chain. Specific part classes vary by program; submit a drawing for an accurate quote.

    Hydrodynamic Test Model Hardware

    Precision-milled mounting hardware, instrumentation adapters, and structural components for towing-tank, cavitation-tunnel, and rotating-arm test models.

    Propulsor and Shafting Test Articles

    Tight-tolerance turned and milled components — bushings, sleeves, alignment fixtures, and adapter rings — for propulsor R&D and shafting evaluation.

    Hull-Form and Appendage Test Fixturing

    Custom hull-section adapters, appendage mounting hardware, and load-application fixtures supporting platform-integrity research.

    Undersea Vehicle Sub-Components

    Precision-machined housings, pressure-vessel hardware, and structural components for unmanned undersea vehicle (UUV) and submersible R&D programs.

    Acoustic and Signature Measurement Hardware

    Sensor mounts, calibration fixtures, and instrumentation housings supporting acoustic and signature measurement campaigns at Carderock facilities.

    CNC Machining Services

    Full-service precision CNC machining shipped from our Hanover, PA facility to West Bethesda, Maryland and the surrounding defense corridor.

    Add Olympus Machining to Your NSWC CD Supplier List

    Supplier qualification packages — ITAR registration confirmation, CAGE 9V9P0, CMMC Level 1 self-assessment, and quality flowdown acknowledgement — are available on request. Contact us to begin the qualification process for your NSWC Carderock program.