Picatinny Arsenal CNC Machining Services

CNC machining services for Picatinny Arsenal manufacturers. ITAR-registered precision machine shop in Hanover, PA.

Precision CNC machining services for manufacturers and OEMs in Picatinny Arsenal. Olympus Machining LLC is an ITAR-registered CNC machine shop in Hanover, Pennsylvania offering CNC milling, CNC turning, and prototype-to-production machining.

About Picatinny Arsenal CNC Machining Services

Picatinny Arsenal CNC Machining Services at Olympus Machining LLC is delivered from our ITAR-registered precision CNC machine shop in Hanover, Pennsylvania (York County). This page (https://www.olympusmachining.com/areas-served/picatinny-arsenal-cnc-machining) documents the scope, controls, and engineering practices we apply for OEM, aerospace, defense, and medical buyers requesting picatinny arsenal cnc machining services.

Olympus Machining is CAGE 9V9P0, CMMC Level 1 self-attested per FAR 52.204-21, and NAICS 332710. CMM dimensional inspection is performed in-house on Haas HMM 430 and Chien Wei CWB-450-CNC. AS9102 Rev C First Article Inspection packages, material certifications with heat/lot traceability, and Certificates of Conformance are produced on request as part of picatinny arsenal cnc machining services.

To request a quote, supplier qualification documentation, or a controlled copy of our capability statement related to picatinny arsenal cnc machining services, contact info@olympusmachining.com or call (717) 634-5094. Olympus Machining LLC, 639 Frederick Street Suite 1, Hanover, PA 17331.

Related pages

    Approximately 175 miles / 3 hr from Hanover, PA via I-78 East and I-287 North

    Picatinny Arsenal CNC Machining Services | Olympus Machining, Hanover PA

    Olympus Machining LLC is an ITAR-registered, CAGE 9V9P0 precision CNC machine shop in Hanover, Pennsylvania supplying precision machined components to prime contractors and program offices supporting Picatinny Arsenal — the U.S. Army's Joint Center of Excellence for Guns and Ammunition and lead RDEC for armaments lethality. Our York County, PA facility supports same-week prototype turnaround and traceable production deliveries to the Picatinny armaments supply chain.

    Qualified Supplier for Picatinny Defense Programs

    ITAR Registered

    Registered with the U.S. Department of State DDTC. Authorized to manufacture defense articles for controlled programs.

    CAGE Code 9V9P0

    Active Commercial and Government Entity code registered to our Hanover, PA facility for federal procurement and supplier qualification.

    CMMC Level 1

    Practices aligned with the 17 FAR 52.204-21 safeguards. Annual SPRS self-assessment. Details.

    Part Categories Procured by Picatinny and Its Contractors

    Representative categories of precision machined components Olympus Machining produces for the Picatinny Arsenal supply chain. Specific part classes vary by program; submit a drawing for an accurate quote.

    Armament Component Prototypes

    Precision-milled receivers, housings, and mechanism components for small-, medium-, and large-caliber armaments R&D programs.

    Test Article Fixturing

    Custom test fixtures, instrumentation adapters, and ballistic-test hardware supporting weapons-effects evaluation at Picatinny ranges.

    Fuze and Munition Sub-Components

    Non-energetic precision components — bodies, retainers, alignment fixtures, and inspection gages — supporting fuze and munition development.

    Weapon-Mounted Accessory Hardware

    Rail-system adapters, sight mounts, and bracket assemblies in 7075-T6 aluminum and 17-4 PH stainless for soldier-system integration testing.

    Reverse-Engineered Legacy Parts

    Drawing-based or digitized reproduction of obsolete components supporting depot-level overhaul and sustainment of legacy armament systems.

    CNC Machining Services

    Full-service precision CNC machining shipped from our Hanover, PA facility to Picatinny, New Jersey and the surrounding defense corridor.

    Add Olympus Machining to Your Picatinny Supplier List

    Supplier qualification packages — ITAR registration confirmation, CAGE 9V9P0, CMMC Level 1 self-assessment, and quality flowdown acknowledgement — are available on request. Contact us to begin the qualification process for your Picatinny Arsenal program.